menu

Socket Weld Flange

Socket Weld Flange
Socket Weld Flange

Socket Weld Flanges are connected to pipes using a single fillet weld executed on the outer side of the flange (different from the slip-on flange type that requires two welds).

According to ASME B31.1, to execute a flanged connection using a socket weld flange, the pipe shall be at first inserted in the socket of the flange until it reaches the bottom of the flange, then it should be lifted by 1.6 mm and finally welded.

This gap shall be left to allow proper positioning of the pipe inside the flange socket after the solidification of the weld.Socket Weld Flanges are used for small-size and high-pressure piping that do not transfer highly corrosive fluids.

This due to the fact that these flange types are subject to corrosion in the gap area between the end of the pipe and the shoulder of the socket.

Their static strength of socket weld flanges is similar to slip-on flanges’, but their fatigue strength is higher due to the presence of a single, instead of double, fillet weld.

We manufacture Galvanized SOCKET WELD FLANGE, Stainless steel (SS) SOCKET WELD FLANGE, Carbon steel (CS) SOCKET WELD FLANGE, MS SOCKET WELD FLANGE, Alloy SOCKET WELD FLANGE, Nicked SOCKET WELD FLANGE, Duplex stainless steel (DSS) SOCKET WELD FLANGE, Super Duplex stainless Steel (SDSS) SOCKET WELD FLANGE and Brass SOCKET WELD FLANGE.

We manufacture SOCKET WELD FLANGE as per ASME B16.5, ASME B16.47, DIN,etc.
We export SOCKET WELD FLANGE to United States (USA), Canada, Germany, Japan, France, Middle-east, Bangladesh, Nepal, etc.
We are manufacturers and suppliers of SOCKET WELD FLANGE since the year 1971.

TESHI GROUP © Copyright 2021.
Design By Studio Teshi